Page 1 of 1
Posted: Mon Apr 16, 2012 12:37 am
I have a Goldstar gpi-110m. it has the power cable but no extra controllers or games. i live in the united states and would like to sell it here or UK if paid more. please leave reply if interested.
Posted: Tue Apr 17, 2012 10:01 am
If you can please post pictures of the item and if you can of the item working, a price for the item and the cost of postage.
If you can also include a link to feedback from another forum or eBay as you only have 2 posts on here.
Posted: Tue Apr 17, 2012 2:15 pm
my ebay name is gokull13. I'm not at home right now to take pictures of the system working. I just want to get a general estimate of the value because their is very little info on this version of the system.
Posted: Tue Apr 17, 2012 2:22 pm
Is the system a:
I can't find reference to this system...
If it's the 1100M then you could use this completed auction as a guideline.
It was sold for $300
I would personally say around £100 - £150 though
Posted: Tue Apr 17, 2012 2:24 pm
it is the first one. i did not it was that valuable. are they really rare?
Posted: Tue Apr 17, 2012 2:27 pm
I'm not sure, I haven't seen many about but I'm not actively looking for variants for this platform.
These prices are just guidelines, doesn't mean it'll sell for that
my advise is just get some pictures up and think about what you want to charge.
Good luck with you're sale
Posted: Tue Apr 17, 2012 2:33 pm
this is not related to buying or selling but the button that you push to open the disc reader is very had to push down. is there any way to lubricate the mechanism or clean it out?
Posted: Tue Apr 17, 2012 2:36 pm
You need to open the case and check to see if you experience the same results by pressing the microswitch the button makes contact with.
Chances are you won't so the next thing to do is check to see if anything obvious is stopping the button from making contact with the micro switch and go from there.
Also if you're selling with this fault don't forget to mention in you're original post
Posted: Tue Apr 17, 2012 2:38 pm
is it very difficult to open? i dont want to damage any of the internals or lower the value of the device.
Posted: Tue Apr 17, 2012 2:46 pm
I don't own one of these machines so couldn't comment or recommend it.
However it should just be a case of removing the screws on the underneath of the unit and lifting off the lid.
You should hopefully see everything you need to work with without removing any other components.