Lego Mindstorms Cd-i

Post by **Bas** » Wed Sep 07, 2005 6:11 pm

Erronous?

Erronous · Post by **Erronous** » Wed Sep 07, 2005 9:51 pm

Post by **Bas** » Thu Sep 08, 2005 6:41 am

i guess you know more about this. Do you have this title?

Erronous · Post by **Erronous** » Thu Sep 08, 2005 3:24 pm

Yes, but it won't run. Mayve with a serial dongle, but I haven't tried it yet.

Post by **Bas** » Thu Sep 08, 2005 4:04 pm

is it a cd-r? does it have a cover...?

Erronous · Post by **Erronous** » Thu Sep 08, 2005 6:01 pm

it's a CD-r

Post by **Bas** » Thu Sep 08, 2005 7:34 pm

ok
thanks, i guess...

Erronous · Post by **Erronous** » Thu Sep 08, 2005 8:08 pm

Anyone an idea how to make a testplug? Connecting tx to rx does not work here.....

cdifan · Post by **cdifan** » Thu Sep 08, 2005 8:48 pm

According to PMPRO on ICDIA here that is indeed the correct way to make a test plug...

Maybe it needs both txd/rxd and cts/rts wired together?

Erronous · Post by **Erronous** » Thu Sep 08, 2005 10:10 pm

Nope, doesn't work at all. Maybe I should try connecting a terminal to the serial port and see what comes out or try running it on the CDI605. There are also special controllers that were needed to run some titles, maybe this is one of those titles.

Post by **Bas** » Thu Sep 22, 2005 9:36 pm

how do you know if it is a cd-i then....?

Erronous · Post by **Erronous** » Thu Sep 22, 2005 10:12 pm

It's recognized as CD-i and there is a cd-i file system with executables on the disc. And maybe I should have been more specific; the applications runs of course, but it aborts due to a missing device.