cdi 605 Video Cartridge
-
- Burn:Cycle Activated
- Posts: 5
- Joined: Mon May 15, 2006 11:38 pm
- Location: London
cdi 605 Video Cartridge
HI, does anyone know where you can get a video cartridge for the 605t or if the 22ER9141 cartridge can be used without its housing?
- cdifan
- CD-i Emulator Author
- Posts: 923
- Joined: Fri Jun 24, 2005 6:19 am
- Location: The Netherlands
- Contact:
Unfortunately, you need special DVC ROMs to use a "standard" cartridge with a 605; just stripping the housing is not enough.
Older 605 players may also need a physical connector change, where one of the "extension board" connections is exchanged for a DVC connector.
You used to be able to order these "DVC compatibility kits" from Philips, but that is probably no longer the case...
Older 605 players may also need a physical connector change, where one of the "extension board" connections is exchanged for a DVC connector.
You used to be able to order these "DVC compatibility kits" from Philips, but that is probably no longer the case...
-
- Burn:Cycle Activated
- Posts: 5
- Joined: Mon May 15, 2006 11:38 pm
- Location: London
You have a 605T? Do you have the floppy boot disc for it?
I've got a 605T that arrived with no boot disk, and have been unsuccessful in using the serial cable trick to make one. I get most of the way through the instructions and the command to extract the ramdisk just throws me wierd error #s that I don't find any docs on anywhere.
I've got a 605T that arrived with no boot disk, and have been unsuccessful in using the serial cable trick to make one. I get most of the way through the instructions and the command to extract the ramdisk just throws me wierd error #s that I don't find any docs on anywhere.
From my last attempt:
Anyway, I'm following the instructions I got from cdifan, and I've gotten the stub loader up and running. So, now I have a file os9sys.dsk in the ramdisk (/r768), and a formatted DD floppy in /d0.
Ok.
Now, the instructions say to type: copy /r768 /d0@
And I get: copy: can't open '/r768' - Error #000:214
I tried: copy /r768/os9sys.dsk /d0@
And I get: copy: "/d0@" already exists. Error #000:218
I tried: copy /r768/os9sys.dsk /d0@ -r
And I get: copy: can't access '/d0@' - Error #000:214
Anyone here with any OS-9 experience have a clue as to what the right command is to write the disk image to a floppy?
Anyway, I'm following the instructions I got from cdifan, and I've gotten the stub loader up and running. So, now I have a file os9sys.dsk in the ramdisk (/r768), and a formatted DD floppy in /d0.
Ok.
Now, the instructions say to type: copy /r768 /d0@
And I get: copy: can't open '/r768' - Error #000:214
I tried: copy /r768/os9sys.dsk /d0@
And I get: copy: "/d0@" already exists. Error #000:218
I tried: copy /r768/os9sys.dsk /d0@ -r
And I get: copy: can't access '/d0@' - Error #000:214
Anyone here with any OS-9 experience have a clue as to what the right command is to write the disk image to a floppy?