anywhere where i can see the pin layout on the input plug on the CDI??
i cant seem to find a pionting device (aka Joystick or Mouse) for my CDi210, so im about to build my own from old Commodore joysticks or maybe an Amiga mouse....
pin layout on joyport?
- DorkVonWaterfall
- Burn:Cycle Activated
- Posts: 9
- Joined: Wed Feb 07, 2007 11:23 pm
pin layout on joyport?
C64 I,C64 II,C64 DTV,A500,A600,A CDTV,Philips CD-I,N64,PSII,XBox,Compaq Contura420C,C 1084S-D1,1530-C2N + 3 PC`s and whole lot more crap in the cupboards
- Bas
- CDinteractive Admin
- Posts: 3041
- Joined: Mon Jun 20, 2005 11:14 am
- Location: the Netherlands
- Contact:
The wiring of the touchpad you can find in this french pdf on page 3
click here
I can't check the link because it is blocked at work, but if it doesn't work out, I'll show you later
click here
I can't check the link because it is blocked at work, but if it doesn't work out, I'll show you later
- Bas
- CDinteractive Admin
- Posts: 3041
- Joined: Mon Jun 20, 2005 11:14 am
- Location: the Netherlands
- Contact:
As you can see, Interactive Dreams is taking care of english versions of the repair sections, for those who don't speak french.
- DorkVonWaterfall
- Burn:Cycle Activated
- Posts: 9
- Joined: Wed Feb 07, 2007 11:23 pm
- DorkVonWaterfall
- Burn:Cycle Activated
- Posts: 9
- Joined: Wed Feb 07, 2007 11:23 pm
- cdifan
- CD-i Emulator Author
- Posts: 923
- Joined: Fri Jun 24, 2005 6:19 am
- Location: The Netherlands
- Contact:
The CD-i "joystick" port is a generic serial port; it does not *have* pins for up, down, etc. Information about the pins and protocol can be found on the ICDIA site here; look under "Technical Info Pointing Devices".
Someone has built a mouse "adapter" that you might be able to modify for joysticks; information about this is here.
Someone has built a mouse "adapter" that you might be able to modify for joysticks; information about this is here.
- DorkVonWaterfall
- Burn:Cycle Activated
- Posts: 9
- Joined: Wed Feb 07, 2007 11:23 pm
Wow...thx cdifan....
i just realized that im gonna buy me a pointing device on Egay or so....
had no idea that it would be so difficult to modify a joystick
i just realized that im gonna buy me a pointing device on Egay or so....
had no idea that it would be so difficult to modify a joystick
C64 I,C64 II,C64 DTV,A500,A600,A CDTV,Philips CD-I,N64,PSII,XBox,Compaq Contura420C,C 1084S-D1,1530-C2N + 3 PC`s and whole lot more crap in the cupboards