Goldstar GPI-1100M
Goldstar GPI-1100M
I have a Goldstar gpi-110m. it has the power cable but no extra controllers or games. i live in the united states and would like to sell it here or UK if paid more. please leave reply if interested.
- K1ngArth3r
- Sum Zero Barman
- Posts: 357
- Joined: Mon Aug 25, 2008 12:16 pm
- Location: Derbyshire, England
- K1ngArth3r
- Sum Zero Barman
- Posts: 357
- Joined: Mon Aug 25, 2008 12:16 pm
- Location: Derbyshire, England
Is the system a:
Goldstar GPI-1100M
![Image](http://www.icdia.co.uk/players/gpi1100.jpg)
or
Goldstar GPI-110M
![Image](http://www.schoolsedu.com/Admin/Upload/Schools/634611078030407980_NO%20IMAGE.jpg)
I can't find reference to this system...
If it's the 1100M then you could use this completed auction as a guideline.
http://www.ebay.ca/itm/120862267161#ht_8267wt_1156
It was sold for $300
I would personally say around £100 - £150 though
Goldstar GPI-1100M
![Image](http://www.icdia.co.uk/players/gpi1100.jpg)
or
Goldstar GPI-110M
![Image](http://www.schoolsedu.com/Admin/Upload/Schools/634611078030407980_NO%20IMAGE.jpg)
I can't find reference to this system...
If it's the 1100M then you could use this completed auction as a guideline.
http://www.ebay.ca/itm/120862267161#ht_8267wt_1156
It was sold for $300
I would personally say around £100 - £150 though
- K1ngArth3r
- Sum Zero Barman
- Posts: 357
- Joined: Mon Aug 25, 2008 12:16 pm
- Location: Derbyshire, England
- K1ngArth3r
- Sum Zero Barman
- Posts: 357
- Joined: Mon Aug 25, 2008 12:16 pm
- Location: Derbyshire, England
You need to open the case and check to see if you experience the same results by pressing the microswitch the button makes contact with.
Chances are you won't so the next thing to do is check to see if anything obvious is stopping the button from making contact with the micro switch and go from there.
Also if you're selling with this fault don't forget to mention in you're original post![Wink :wink:](./images/smilies/icon_wink.gif)
Chances are you won't so the next thing to do is check to see if anything obvious is stopping the button from making contact with the micro switch and go from there.
Also if you're selling with this fault don't forget to mention in you're original post
![Wink :wink:](./images/smilies/icon_wink.gif)
- K1ngArth3r
- Sum Zero Barman
- Posts: 357
- Joined: Mon Aug 25, 2008 12:16 pm
- Location: Derbyshire, England